ACCESSORIES for all systems

Accessories for All Systems

These practical accessories are intended for all VOGA TRADE systems. Among them you will find holders and shelves for cables, angular connectors, blinds, trolleys for personal computers, wheels, ladders and railings.

AVAILABLE PRODUCTS



CABLE HOLDER

ART. 20048
L: 120 mm
Material: plastic


DOUBLE CABLE HOLDER

ART. 20640
L: 215 mm
Material: plastic


CABLE TUBE ø72

ART. 30077
H: 715 mm / W: ø 72 mm
Colour: RAL 9006G, other colours by request


CABLE SHELF

ART. 30525
H: 70 mm / L: 300 mm / D: 130 mm
Colour: RAL 9006G, other colours by request


ANGULAR CONNECTING PLATE

ART. 30705
H: 120 mm / L: 50 mm / D: 120 mm
Colour: RAL 9006G, other colours by request


BLIND

ART. 30093
H: 429 mm / L: 485 mm
Colour: RAL 9006G, other colours by request

BLIND screen can be used as a decorative element. It attaches to a table top behind a computer screen or between two workstations and thus also serves as a partition for assembled tables.


COMPUTER TROLLEY

ART. 30641
H: 280 mm / L: 233 mm / D: 520 mm
Colour: RAL 9006G, other colours by request

This mobile PC computer carrier makes connection and disconnection of cables easier. Wheels are placed under the support plate to allow the trolley to move.


FURNITURE WHEEL WITH PLATE 42×42

ART. 20677
H: 102 mm
Material: plastic

Intended for drawers and smaller cabinets. It has a built-in brake and a rubber tread with a 42 x 42 mm mounting plate.


BUNK BED LADDER V

ART. 30692
H: 1348 mm / L: 356 mm
Colour: RAL 9006G, other colours by request

Made of curved metal profiles and allows safe access to the top of the bunk.


BUNK BED FENCE V

ART. 30693
H: 277 mm / L: 1218 mm / D: 22 mm
Colour: RAL 9006G, other colours by request

Designed to protect the upper floor of the bunk bed.


PERFORATED BACK

BACK 800 | ART. 30165 | L: 700 mm
BACK 1000 | ART. 30166 | L: 900 mm
BACK 1200 | ART. 30167 | L: 1100 mm
BACK 1400 | ART. 30168 | L: 1300 mm
BACK 1600 | ART. 30169 | L: 1500 mm
BACK 1800 | ART. 30170 | L: 1700 mm
BACK 2000 | ART. 30171 | L: 1900 mm

Colour: RAL 9006G, other colours by request

Made of perforated sheet metal with square holes 10 x 10 mm, 45 mm apart. The back is attached to the lower part of the table top via brackets.


BACK HOLDER

ART. 30030
H: 308 mm / L: 62 mm
Colour: RAL 9006G, other colours by request

These brackets are used to attach wooden or metal perforated backs. You need two brackets for backs 800–1400 mm long, and three brackets for backs 1600–2000 mm long.



System WALL

System WALL

The system of aluminum wall profiles enables the assembly of various configurations in combination with all kinds of supporters and hangers. The supporters are simply fixed to various places of the wall or partition containing the wall profile. There are two types of basic profiles to choose from.

PROFILES


Single or double for hanging attachments and supporters
Anodized aluminium

ATTACHMENTS


Shelf, pot and box supporters for the WALL profiles
They maintain order and transparency

HANGERS


Suitable for shops and presentation rooms
White zinc surface


Furniture Bases

Furniture Bases

Furniture bases are designed for cabinets, seating furniture and beds. All pieces are powder coated and meant for  indoor use.

CUBIC/OPTIC


Made of sheet metal and metal profiles
For the bases of cabinets, drawers and upholstered furniture
Height adjustment (8 mm)

SILK


For easy bed assembly
Made of metal and finished with a plastic sliding surface
Headboard brackets attached to the bed frame


System ELTIPLA

System ELTIPLA

The ELTIPLA metal base with electric height adjustment provides a flexible and ergonomically adjustable workplace. The height is regulated by pressing a switch. The stepless height range of the table base is from 617 to 1217 mm. The recommended dimensions of table tops are 750–900 mm in width and 1200–2200 mm in length.

The ELTIPLA base is suitable for all work environments, as it allows sitting and standing work. Many use this table in workshops, where the height of physical work is very important due to the load on certain parts of the body. Its stability and load capacity allows 120 kg of load. The legs have leveling and are powder coated in the standard color RAL 9006.

ELTIPLA 2


Electrical height adjustment
Automatic safety brake
For single table tops

ELTIPLA 3


Electrical height adjustment
Automatic safety brake
For corner table tops


Self-Standing Table Bases

Self-Standing Table Bases

A common feature of the self-standing table bases is the central column. The columns can be mounted on different shapes of plates, depending on the program you choose. The TERRA and BOMA programs have several components that can be combined and assembled together.

These table bases can be used individually or in combination. Due to their height, all stand-alone bases can be used in combination with other VOGA TRADE systems in this catalog.

TERRA


Central support for smaller tables
Several bases together for larger tables
Compatibility of all elements
Not recommended for use in restaurants and catering

BOMA


Composed of crosses, metal columns and round plates
For bigger tables or when combining conference tables
Special heights on order

GAST


For tables that require greater stability
Leveling on uneven ground
Low floor plate for unobstructed leg movement


Self-Standing Legs

Self-Standing Legs

SELF-STANDING LEGS are used to assemble tables without additional connectors and as support legs in all VOGA systems. When assembling a table with self-standing legs, it is necessary to use a table top at least 25 mm thick. The maximum recommended length of the table top is 1600 mm and the width is 1000 mm. All legs (except legs with wheels) have the possibility of leveling, and some versions are also height-adjustable. They are powder coated in the standard color RAL 9006G.

FIFTY


Made of round profile ø 50 mm
As a fixed leg with leveling and/or height adjustment
For stand-alone tables or support for other systems
Also as a leg with wheel and brake

CUB-IN


Square profile 50 x 50 mm
Fixed leg with leveling (10 mm)
Height-adjustable leg by means of an additional plug
Leg with wheel and brake

SIXTY


Made of round profile ø 60 mm
As a fixed leg with leveling and/or height adjustment
For stand-alone tables or support for other systems
Also as a leg with wheel and brake

EIGHTY


Made of round profile ø 80 mm
Fixed leg with leveling (10 mm)
For stand-alone tables or as support for other systems

ROMB


Made of a square aluminum profile 50 x 50 mm or 80 x 80 mm
Leveling option (10 mm)
Anodised surface

PARK Z


Made of iron profiles with a folding mechanism
After use, tables can be stored in a small space
Fixed or on wheels

FIFTY Z


Legs with folding and leveling mechanism
For temporary tables at occasional events
Protection against table top damage when folded

SKIP


Folding mechanism
Quick table assembly
Can be stored quickly after use

A-LEG


Stable construction
Modern design

U-LEG


Stable construction
Modern design

O-LEG


Stable construction
Modern design


System BACK

System BACK

The BACK system is a way of interconnecting the legs with wooden backs, making a stable and solid table base. The wooden back is made by a carpenter or a furniture manufacturer from an 18 mm chipboard.
The hardware for connecting the legs with wooden backs is included in the leg set. You will find the plan for making a wooden back below. Installation is quick and easy.
The BACK system is intended for table tops of over 24 mm thickness and 600–800 mm width. All parts are powder-coated in RAL 9006G silver colour or upon request in your desired color tone according to the RAL scale. The maximum permitted load on the table top is 150 kg/m2.

Leg models of this system



AVA


Metal profiles of semi-oval and oval cross-section
Fixed legs with leveling
For table tops 600–800 mm wide



System SOLO

System SOLO

SOLO legs are made of square or round iron pipes. They are suitable for table tops 18 mm thick and more, 800–2000 mm long and 650–700 mm wide. The maximum allowable weight of the table top is 25 kg/m2 and the load is 100 kg/m2.

SOLO ARCH


Suitable for tables in children's rooms, school tables and for arranging a home workspace.

SOLO SIMPLE


Suitable for tables in children's rooms, school tables and for arranging a home workspace.


System KOTA

System KOTA

KOTA legs are made of square or round iron pipes, which in combination with the connectors from the KOTA system form a stable, aesthetic base. The legs are suitable for table tops 18 mm thick and more, with a maximum recommended length of 2000 mm and a width of 1600 mm. The maximum weight of the board can be 40 kg/m2 and the load up to 150 kg/m2. The legs have a levelling option and are powder coated in the standard colour RAL 9006G.

KOTA 80×80


Legs made of square profiles
Great support for table tops of any size
Fixed height with leveling

KOTA ø80


Legs made of square profiles
Great support for table tops of any size
Fixed height with leveling


System EDGE

System EDGE

The EDGE system is designed to create a shadow line detail between the legs and table top, which creates a feeling of a floating table top. It is a stable and economical solution for assembling various configurations of table bases. Metal connectors of different lengths for table tops 600–2000 mm long and 600–800 mm wide are used to connect different legs to form a stable independent frame construction. This enables the installation of thinner laminates in addition to conventional table tops, because the frame substructure offers sufficient support and prevents bending of work surfaces. In addition to fixed connectors, the system also offers adjustable length connectors that allow maximum adjustment of the composition.

All parts are powder-coated in RAL 9006G silver or on request in the desired colour tone according to the RAL scale. The EDGE system is created for tabletop thicknesses over 12 mm with a maximum weight of 25 kg/m2. The maximum permissible load on the table top is 150 kg/m2.

HAVANA


Square profiles
Leg leveled with the edge of the table top
10 mm shadow line between the leg and table top
Height adjustment option
Leveling

FLAT


Rectangular profiles
Leg leveled with the edge of the table top
10 mm shadow line between the leg and table top
Height adjustment option
Leveling

Angular Solution

For legs from system EDGE


Telescopic connectors can be used with all other dimensions of table plates.