Accessories for All Systems

CABLE HOLDER

ART. 20048
L: 120 mm
Material: plastic

Intended use: To easily ensure cables under the table plate.

DOUBLE CABLE HOLDER

ART. 20640
L: 215 mm
Material: plastic

Intended use: To easily ensure cables under the table plate.

CABLE TUBE ø72

ART. 30077
H: 715 mm / W: ø 72 mm
Colour: RAL 9006G, other colours by request

Wire spring.

CABLE SHELF

ART. 30525
H: 70 mm / L: 300 mm / D: 130 mm
Colour: RAL 9006G, other colours by request

Intended use: To place cables and other elements under the table plate.

ANGULAR CONNECTING PLATE

ART. 30705
H: 120 mm / L: 50 mm / D: 120 mm
Colour: RAL 9006G, other colours by request

Metal connecting plate for a wider use.

BLIND

ART. 30093
H: 429 mm / L: 485 mm
Colour: RAL 9006G, other colours by request

BLIND screen can be used as a decorative element. It attaches to a table top behind a computer screen or between two workstations and thus also serves as a partition for assembled tables.

COMPUTER TROLLEY

ART. 30641
H: 280 mm / L: 233 mm / D: 520 mm
Colour: RAL 9006G, other colours by request

This mobile PC computer carrier makes connection and disconnection of cables easier. Wheels are placed under the support plate to allow the trolley to move.

FURNITURE WHEEL WITH PLATE 42×42

ART. 20677
H: 102 mm
Material: plastic

Intended for drawers and smaller cabinets. All wheels have a built-in brake and a rubber tread with a 42 x 42 mm mounting plate. The load for one wheel is 40kg.

BUNK BED LADDER V

ART. 30692
H: 1348 mm / L: 356 mm
Colour: RAL 9006G, other colours by request

Made of curved metal profiles and allows safe access to the top of the bunk.

BUNK BED FENCE V

ART. 30693
H: 277 mm / L: 1218 mm / D: 22 mm
Colour: RAL 9006G, other colours by request

Designed to protect the upper floor of the bunk bed.

PERFORATED BACK

BACK 800 | ART. 30165 | L: 700 mm
BACK 1000 | ART. 30166 | L: 900 mm
BACK 1200 | ART. 30167 | L: 1100 mm
BACK 1400 | ART. 30168 | L: 1300 mm
BACK 1600 | ART. 30169 | L: 1500 mm
BACK 1800 | ART. 30170 | L: 1700 mm
BACK 2000 | ART. 30171 | L: 1900 mm

Colour: RAL 9006G, other colours by request

Made of perforated sheet metal with square holes 10 x 10 mm, 45 mm apart. The back is attached to the lower part of the table top via brackets.

BACK HOLDER

ART. 30030
H: 308 mm / L: 62 mm
Colour: RAL 9006G, other colours by request

These brackets are used to attach wooden or metal perforated backs. You need two brackets for backs 800–1400 mm long, and three brackets for backs 1600–2000 mm long.