CON
CON
CON legs are made out of solid oak in combination with metal profiles of round and rectangular cross-section. The legs have a possibility of leveling. The metal parts are powder coated and the wooden parts are oiled. With CON legs is typical because of their shape that the length of the connector is equal the length of table plate minus 400 mm.
AVAILABLE LEG SIZES
CON ø40/800
31521 | RAL 9005FE, oiled oak
Other colours by request
H: 715 mm / W: 774 mm
Table top width: min. 800 mm


CON 40×40/800
31522 | RAL 9005FE, oiled oak
Other colours by request
H: 715 mm / W: 773 mm
Table top width: min. 800 mm


HA SIDE
HA SIDE
HA SIDE legs are made out of profiles of rectangular cross-section. They offer a modern, stable and elegant solution of making a table of above-standard lengths (standard connectors, table top up to 2500 mm). All legs have the option of levelling, the surface is powder coated. Packed in cardboard boxes (2 pieces).
AVAILABLE LEG SIZES
HA-SIDE 60×20/800
31395 | RAL 9006G
21395 | RAL 9005FE
Other colours by request
H: 715 mm / W: 790 mm
Table top width: 800 mm
Leveling: 10 mm


Due to the special shape of the HA-SIDE legs, the length of the connectors = the length of the table top minus 400 mm.
TEEN
TEEN
TEEN legs are made of rectangular profiles 40 x 25 mm. Vertical profiles are connected under cross-section profile where desk bar, which is connecting two legs, is placed too. Structure is extremely stable due to special construction. Leg TEEN is used for table tops in width from 700 up to 800 mm. All legs have the option of levelling. Surface is powder coated. Packed in cardboard boxes (2 pieces), which is 5-times smaller as by other legs in DESK BAR sistem. Legs are packed disassembled.
The author of the conceptual design and co-author of the product is Lenart Oberwalder Zupanc, a student at the Vocational College in Ljubljana, under the mentorship of Ernest Nograšek u.d.i.o. and in collaboration with the VOGA development department.
AVAILABLE LEG SIZES
TEEN
31520 | RAL 9006G
21520 | RAL 9005FE
Other colours by request
H: 715 mm / W: 625 mm
Table top width: 700–800 mm
Leveling: 10 mm


CUSTOM TEEN ACCESSORIES
TEEN BENCH
TEEN BENCH 1200, L: 1200 mm
31324 | RAL 9006G
21324 | RAL 9005FE
TEEN BENCH 1400, L: 1400 mm
31322 | RAL 9006G
21322 | RAL 9005FE
TEEN BENCH 1600, L: 1600 mm
31323 | RAL 9006G
21323 | RAL 9005FE


ELTIPLA 3
ELTIPLA 3
With the ELTIPLA 3 bases, the height of the table can be electrically adjusted, enabling work while seated or standing up. The mechanism allows up to 180 kg load and is one of the quietest on the market (43 dB). The legs have leveling (10 mm) and electric height adjustment (from 617-1267 mm) with safety automatic brake.
AVAILABLE LEG OPTIONS
ELTIPLA 3
31265 | RAL 9006
H: 715 (617–1267) mm / W: 500 mm
Table top length: from 1500 mm to 2350 mm with extension from 1200 mm to 1500 mm
Leveling: 10 mm


FLAT
FLAT
FLAT legs are made out of rectangular profiles. They are levelled with the edge of the table top with a 10 mm gap, creating an optical shadow line and a feeling of a floating table. The legs have the option of levelling. All legs are powder coated. Packed in cardboard boxes (2 pieces).
AVAILABLE LEG SIZES
FLAT 800
31490 | RAL 9006G
21490 | RAL 9005FE
Other colours by request
H: 715 mm / W: 794 mm
Table top width: 800 mm
Leveling: 10 mm


FLAT 600
31489 | RAL 9006G
21489 | RAL 9005FE
Other colours by request
H: 715 mm / W: 594 mm
Table top width: 600 mm
Leveling: 10 mm


HAVANA
HAVANA
HAVANA legs are made out of square profiles. The legs are levelled with the edge of the table top with a 10 mm gap, creating an optical shadow line of a floating table. The legs have the option of levelling and can be height adjustable (from 736 to 856 mm) with an extra set of height adjustable plastic pins. All legs are powder coated.Packed in cardboard boxes (2 pieces).
AVAILABLE LEG SIZES
HAVANA 40/800
31429 | RAL 9006G
21429 | RAL 9005FE
Other colours by request
H: 715 mm / W: 794 mm
Table top width: 800 mm
Leveling: 10 mm


HAVANA 40/600
31428 | RAL 9006G
21428 | RAL 9005FE
Other colours by request
H: 715 mm / W: 594 mm
Table top width: 600 mm
Leveling: 10 mm


HEIGHT-ADJUSTABLE PLUG CUBO 40
30702 | RAL 7015 plastic
20702 | RAL 9005 plastic
Two plug sets are required for one leg. Using the plugs, the height of the table can be adjusted from 736 to 856 mm.


MOST
MOST
MOST legs are made from a rectangular cross-section profile. Because of its shape, they offer a particular stable structure, which is also suitable for dining tables. The legs have the option of levelling, the surface is powder coated. They are packed in cardboard boxes (2 pieces).
AVAILABLE LEG SIZES
MOST
31270 | RAL 9006G
21270 | RAL 9005FE
Other colours by request
H: 715 mm / W: 780 mm
Table top width: min. 800 mm
Leveling: 5 mm


TILL
TILL
TILL legs are made of rectangular steel pipes (T-legs). There are fixed and height adjustable legs available, with the possibility of additional levelling with the help of a levelling screw. The legs are made for table plates of widths from 600 to 800 mm. Packed in a cardboard box (2 pieces).
AVAILABLE LEG SIZES
TILL T 600
31271 | RAL 9006G
21271 | RAL 9005FE
Other colours by request
H: 715 mm / W: 625 mm
Table top width: 800 mm
Leveling: 10 mm


TILL T 400
31272 | RAL 9006G
21272 | RAL 9005FE
Other colours by request
H: 715 mm / W: 425 mm
Table top width: 600 mm
Leveling: 10 mm


TILL T 600 HV
31273 | RAL 9006G
Other colours by request
H: 680–820 mm / W: 625 mm
Table top width: 800 mm
Leveling: 10 mm


TILL T 400 HV
31274 | RAL 9006G
Other colours by request
H: 680–820 mm / W: 425 mm
Table top width: 600 mm
Leveling: 10 mm


TEND
TEND
TEND legs are made of rectangular steel pipes. The pillar is centrally integrated (T-legs). There are fixed and height adjustable legs available, with the possibility of additional levelling. The surface is powder coated. The legs are made for table plates of widths from 600 to 800 mm. Packed in a cardboard box (2 pieces).
AVAILABLE LEG SIZES
TEND T 600
30744 | RAL 9006G
20744 | RAL 9005FE
Other colours by request
H: 715 mm / W: 734 mm
Table top width: 800 mm
Leveling: 10 mm


TEND T 400
30745 | RAL 9006G
20745 | RAL 9005FE
Other colours by request
H: 715 mm / W: 534 mm
Table top width: 600 mm
Leveling: 10 mm


TEND T 600 HV
30985 | RAL 9006G
Other colours by request
H: 680–820 mm / W: 734 mm
Table top width: 800 mm
Leveling: 10 mm


TEND T 400 HV
30986 | RAL 9006G
Other colours by request
H: 680–820 mm / W: 534 mm
Table top width: 600 mm
Leveling: 10 mm


HQ
HQ
HQ Legs are made out of rectangular iron pipe. Fixed and height adjustable options are available. They offer a modern, stable and elegant solution of making a table. Height adjustable legs can be regulated from 680 to 825 mm with the help of screws for height adjustment. All legs have the option of levelling, the surface is powder coated. Packed in cardboard boxes (2 pieces).
AVAILABLE LEG SIZES
HQ 800
31433 | RAL 9006G
21433 | RAL 9005FE
Other colours by request
H: 715 mm / W: 790 mm
Table top width: 800 mm
Leveling: 5 mm


HQ 600
31432 | RAL 9006G
21432 | RAL 9005FE
Other colours by request
H: 715 mm / W: 590 mm
Table top width: 600 mm
Leveling: 5 mm


HQ 800 HV
31435 | RAL 9006G
21435 | RAL 9005FE
Other colours by request
H: 680–825 mm / W: 790 mm
Table top width: 800 mm
Leveling: 5 mm


HQ 600 HV
31434 | RAL 9006G
21434 | RAL 9005FE
Other colours by request
H: 680–825 mm / W: 590 mm
Table top width: 600 mm
Leveling: 5 mm

